Tank leaks or rust at the base
A leaking tank usually means the inner tank has failed. At that point, replacement is the reliable fix, and it is also the safest choice when the leak is near the burner compartment.
Serving Corpus Christi, Texas & surrounding areas
Mon–Fri 8am–6pm · Sat 9am–2pm
Replace a failing heater fast, size it correctly, and have the gas venting and safety checks handled by a local team that works on water heaters every day.
A gas water heater replacement is more than swapping a tank. A correct gas water heater installation starts with matching the heater to your household demand, confirming combustion air and venting, verifying gas supply and shutoff condition, and setting the temperature for safe operation.
Corpus Christi Water Heater handles new installations and replacements for common tank-style gas units, plus diagnostics when you are not sure if you need repair or replacement. If you are comparing options, we also install electric units, and we can explain the practical differences between gas and electric water heater installation based on your home's existing hookups.
If you are dealing with no hot water, a leak at the tank, or a pilot that will not stay lit, start with an evaluation. Some breakdowns are repairable, while others point to end-of-life equipment. When you need help quickly, water heater repair is often the fastest path to a clear answer and a safe plan.
We evaluate the heater, its connections, and household demand before recommending repair, replacement, or a fuel-type change.
A leaking tank usually means the inner tank has failed. At that point, replacement is the reliable fix, and it is also the safest choice when the leak is near the burner compartment.
Fluctuating temperature can come from sediment, a failing thermostat, or burner and venting issues. We troubleshoot first, then recommend repair or replacement based on condition and safety.
A pilot that will not stay lit may be a thermocouple or gas control issue. If the heater is older or has multiple failing parts, gas water heater replacement may be the better value.
A heater that is undersized will frustrate you even when it is working. We help you choose the right tank capacity and recovery performance for your usage.
Corroded nipples, valves, or flue connections can turn into leaks and venting problems. A replacement gives you a clean start with updated piping and shutoffs as needed.
Some homes convert from electric to gas or the other way around during remodels or equipment changes. We review what is required for a safe, code-appropriate installation.
A safe install comes down to details. We check the gas shutoff valve operation, verify proper pipe sizing for the unit, and confirm there is a working sediment trap (drip leg) where required. We also inspect the vent connector for secure joints and correct slope so flue gases draft the way they should.
Inside many Corpus Christi garages and utility rooms, space and air supply are the limiting factors. If a heater sits in a tight closet or a corner, clearances and combustion air need to be verified before the new unit goes in.
We also look at the water side: a working temperature and pressure relief (TPR) valve with a properly run discharge line, a sound shutoff valve, and a solid connection method (often using dielectric fittings to reduce galvanic corrosion). If the old setup is missing a pan where one is needed, or if there is no safe drain path, we will explain your options before proceeding.
We identify whether you need gas water heater repair Corpus Christi homeowners often request (pilot, gas valve, venting, burner issues) or if the tank itself is failing and replacement is the smarter move.
We size by household demand and your existing venting and gas supply. If you are considering electric water heater installation, we check breaker capacity and wiring requirements at the same time.
We shut down gas and water, drain the tank, disconnect safely, and prep the area. We protect the floor and confirm there is a stable base and appropriate clearance for the new unit.
We reconnect water and gas, confirm venting integrity, set temperature, and test operation. We also verify the TPR valve and discharge line are installed correctly.
Before we leave, we show you shutoffs, explain normal operation, and share simple upkeep steps like periodic flushing and watching for signs of corrosion or venting issues.
Gas water heater installation in Corpus Christi typically ranges from about $1,400 to $3,500+ for a standard tank replacement, depending on the heater size and the amount of piping, venting, and safety updates required. A straightforward like-for-like swap is usually toward the lower end, while installs that need vent corrections, gas line modifications, pan and drain routing, or tight-access work trend higher.
Your final price depends on capacity, efficiency tier, permit or inspection requirements where applicable, condition of the shutoff and piping, and whether parts like the expansion tank or TPR discharge need updating. Exact cost is confirmed after an on-site inspection of the existing heater and connections.
Not every hot water problem requires a new tank. We troubleshoot the most common failures and explain the tradeoffs clearly.
For electric units, water heater element replacement is often the fix when you have some hot water but it runs out quickly, or when the breaker trips and tests point to a shorted element. We also handle water heater thermostat repair when temperature swings or overheating are tied to controls rather than the tank.
If you are shopping specifically for electric water heater replacement Corpus Christi homeowners choose when a tank leaks, we can install the correct size unit and verify the circuit and disconnect are appropriate. And if you need electric water heater repair Corpus Christi residents often request, we can test elements, thermostats, and wiring before recommending replacement.
For gas units, we diagnose ignition, burner, and venting issues as part of gas water heater repair Corpus Christi homes may need. When the tank is leaking, heavily corroded, or repeatedly breaking down, gas water heater replacement Corpus Christi households schedule is usually the reliable option.
Most standard replacements can be completed the same day once the correct unit is on hand, but the timeline depends on venting condition, access, and whether gas or water piping needs updates. If the existing vent connector needs correction or the heater location requires clearance or combustion-air changes, the job takes longer because those safety items come first.
Permit requirements vary by job and jurisdiction, so the right answer depends on the exact installation and what is being changed. If a permit or inspection applies to your replacement, we will tell you up front and build that into the plan before work begins.
The right size depends on your household's peak hot water demand and the heater's recovery performance, not just the old tank's gallon label. During the visit we review how many bathrooms you have, typical simultaneous use (showers, laundry, dishwasher), and your venting and gas supply so the new heater fits both your needs and the installation constraints.
Yes, heating elements are part of electric water heaters, not standard gas tank heaters. If you have an electric unit with lukewarm water or short hot water duration, element testing is usually one of the first diagnostic steps, along with checking thermostats and wiring.
Temperature that swings from hot to cold, water that is too hot even after adjustment, or frequent tripped high-limit resets are common thermostat-related symptoms on electric units. We confirm the cause with testing, because similar symptoms can also come from failing elements, wiring issues, or sediment problems.
Sometimes, but it depends on whether you have the correct electrical circuit capacity, wiring, and disconnect location for the size you want. We can evaluate the feasibility during the same visit and explain what would be required for safe electric water heater installation versus staying with gas.
Tell us what you are seeing (leak, no hot water, temperature swings, pilot issues) and we will inspect the current setup, explain repair versus replacement, and quote a safe gas water heater installation that fits your home.